Hi All
Just wanted to let everyone know that there is a firmware release for your zumspot.
The firmware must be upgraded in root on your ssh console in pi-star.
Go to configuration tab
Click on expert
Click on ssh console
Log in with your pi-star info
Type:
rpi-rw
and press enter to put the pi in read/write mode. Type:
sudo pistar-zumspotflash rpi
and press enter.
Click yes on prompt
Your firmware will upgrade to the latest version.
Reboot after upgrade.
Go to the pi-star update tab and update pi-star.
That’s all there is to it.
When you look at your dashboard under the frequency, the firmware should be 1.4.7.
If you have a jumbospot this update will not work…The update information can be found here:https://jumbospot17.blogspot.com/2018/01/how-to-upgrade-fw.html
Rick n9umj
What do you do if it fails to upgrade?
Forget this, I figured it out, had to stop the mmdvmhost, then kill it to be able to flash the new firmware.
The commands I used were in this order….
rpi-rw
sudo service mmdvmhost stop
sudo pkill MMDVMHost
sudo pistar-zumspotflash rpi